HIGHLY COMPRESSED TUBULAR HEATERS ARE THE MOST ADVANCED HEATING SOLUTION FOR INJECTION MANIFOLDS. THE ROUND SECTION TUBULAR HEATER ALLOWS EXCELLENT HEAT EXCHANGE BETWEEN THE SURFACES OF HEATER AND MANIFOLD. THESE HEATERS ARE INSTALLED BY CAREFUL HAMMERING ON THE HEATER TO FIX PERFECTLY IN THE GROVE OVER THE MANIFOLD AND PRESSED TO HOLD THE HEATERS IN POSITION AND TO GET GOOD SURFACE CONTACT, WHICH RESULTS IN GOOD THERMAL EXCHANGE AND INCREASES THE HEATER LIFE AND REDUCES ENERGY LOSS.
HSCO produce manifold Die heaters -Element Diameter 8.5mm – in AISI 321 / 316 GRADE / [** And also HSCO produce 6.5MM diameter on special Request].
TECHNICAL SPECIFICATION AND TOLERANCES
- Wattage +5% – 10%
- Resistance +10% – 5%
- Die electric strength 1500V
- Insulation > 5M W
- Length + 1%
- Maximum temperature on Heater Surface 450- 550°C
Tubular heaters are supplied in AISI 321 tube. Round section, length, watts, volts and sheath materials can be manufactured and [ALSO SPECIAL CONSTRUCTION LIKE SQUARE / FLEXIBLE heating elements can be supplied on request]